“Servo Combo Evolution-EV 2.5M (#0045SX)” has been added to your cart. / Dodano do koszyka
View as:
  • Promocja!
  • Promocja!
  • Promocja!
    Wypełniacz

    Skrzydło / Wing set (#015W)

    315,00 

     Wing set 1M – HN1033-modified airfoil

    Dodaj do koszyka
  • Promocja!

    TALON 35A, 6S max, heavy duty 8A BEC (#010-0122-00)

    303,66 

    This is a Castle Creations 35 35 Amp Brushless Aircraft/Helicopter ESC. Castle Creations is proud to introduce the next ESC in the Talon series, the Talon 35. This “mighty mini” can take on the most extreme maneuvers while keeping it’s cool. Talon 35 is intended for use in 450 Heli setups running up to 6S or .10 to .20 fixed wing applications pulling up to 35 amps and boasts a 7 amp peak/5 amp continuous BEC, keeping even the most draining servos at ease. The Talon 35 also offers Castle’s industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon included). The compact layout and thin profile make mounting the Talon 35 simple and stress-free in any setup. The Talon 35 offers Castle’s industry-leading functions, not to mention easy programming using the Castle Link USB adapter (coupon for free Castle Link included), or the Castle Field Link Portable Programmer (sold separately).

    Specyfikacja techniczna
    Max current / max prąd: 35 A ciągły
    BEC: 5 A
    Weight / waga: 27.8 g

    Dodaj do koszyka
  • Promocja!

    Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø6mm shaft (#A041S6)

    293,58 
    Diameter/Średnica: 40mm
    Length/Długość: 37mm
    Weight/Waga: 25g
    Shaft diam./Średnica trzonka: 6mm
    Blade mount width: 8mm
    Blade pin diameter: 3mm

    Designed by ART HOBBY and Made in USA.
    Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
    Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
    The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
    This spinner is compatible with Aeronaut and Graupner CAM blades.

    APPLICATIONS:
    Outrunner and Inrunner Geared motors with 6mm shaft diameter.

    Chwilowo niedostępne
  • Promocja!

    Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø5mm shaft (#A040S5)

    293,58 
    Diameter/Średnica: 40mm
    Length/Długość: 37mm
    Weight/Waga: 25g
    Shaft diam./Średnica trzonka: 5mm
    Blade mount width: 8mm
    Blade pin diameter: 3mm

    Two piece, very light construction is precision CNC machined from Dur-alloy material. We designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have internal provisions for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
    The spinner is nice shaped to complement many fuselage pods of the gliders and all around is enhancing gliders finale appearance. The spinner is suitable for Aeronaut and Graupner CAM blades.

    APPLICATIONS:
    Outrunner and Inrunner Geared motors with 5 mm shaft diameter.

    Dodaj do koszyka
  • Promocja!

    Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A041S4)

    293,58 
    Diameter/Średnica: 40mm
    Length/Długość: 37mm
    Weight/Waga: 25g
    Shaft diam./Średnica trzonka: 4mm
    Blade mount width: 8mm
    Blade pin diameter: 3mm

    Two piece, very light construction is precision CNC machined from Dur-alloy material. We designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have internal provisions for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
    The spinner is nice shaped to complement many fuselage pods of the gliders and all around is enhancing gliders finale appearance. The spinner is suitable for Aeronaut and Graupner CAM blades.

    APPLICATIONS:
    Outrunner and Inrunner Geared motors with 4mm shaft diameter.

    Dodaj do koszyka
  • Promocja!
    Wypełniacz

    Płetwa steru kierunku / Vertical stabilizer (#044S)

    273,00 

    Vertical stabilizer – glass carbon composite with horizonlal stabilizer mount and linkage

    Dodaj do koszyka
  • Promocja!

    Kołpak / 35mm “LowDrag” – CNC offset spinner for FP – Ø5mm shaft (#A035S5)

    273,00 
    Diameter/Średnica: 35mm
    Weight/Waga: 21g
    Shaft diam./Średnica trzonka: 5mm

    Designed by ART HOBBY and Made in Poland.
    Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
    Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
    The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
    This spinner is compatible with Aeronaut and Graupner CAM blades.

    APPLICATIONS:
    Outrunner and Inrunner or Geared motors with 5mm shaft diameter.

    Dodaj do koszyka
  • Promocja!

    Kołpak / 35mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A035S4)

    273,00 
    Diameter/Średnica: 35mm
    Weight/Waga: 20g
    Shaft diam./Średnica trzonka: 4mm

    Designed by ART HOBBY and Made in Poland.
    Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
    Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
    The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
    This spinner is compatible with Aeronaut and Graupner CAM blades.

    APPLICATIONS:
    Outrunner and Inrunner Geared motors with 4mm shaft diameter.

    Chwilowo niedostępne

Wyświetlanie 109–126 z 401 wyników