2.4-4.0M

The Serenity wing features MS1.8/9 airfoil that was specially modified for this sailplane, the benefit of that are very wide speed range and good thermal abilities. Its flying weight is approx. 1500 grams (52oz.) and could be flown on the slope in light to high wind condition. The Serenity wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.
Features:
– composite Fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable Canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
– tapered tail boom is made of carbon fiber/glass composite.
– wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
– light weight V-tail is made of foam cores preeshited with thin poplar veneer for durability and stiffness and has pre-hinged control surfaces and

Kit contains: Model components, all necessary hardware, plans and step by step instructions.

There’s a 3-8 day shipment delay for 2,5M+ models.

NEW lightest version with internally hinged Ailerons and Flaps.

New Light weight version The Odyssey-EC flying weight is approx. 900 grams (31 oz.). It features SD7080 airfoil that was specially modified for this sailplane, the benefits of that are extended thermal duration time in very low lift conditions and wide range of speed. Odyssey wing could be built flat-with center dihedral or with polyhedral bends if desired by the builder.

Features:
– 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
– Removable canopy for rapid access to the radio and drive components.
– V-shaped wing saddle with molded in nuts for the wing mounting screws.
– Tapered tail boom made of carbon fiber/glass composite.
– 3-segments wing with removable wing tips for easy storage and transportation.
– Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
– internally hinged ailerons and flaps- vertical stabilizer is made of glass/carbon composite
– horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.

Kit contains: model components, plans, glider name decal, step by step instructions, and all necessary hardware.​
T-tail version is also available.

There’s a 3-8 day shipment delay for 2.5M+ models.

Adventure-E 2.8M flying weight is approx. 800 grams (28 oz.) It features OP0830 airfoil that was specially modified for this sailplane, the benefits of that are wide range of speed and extended thermal duration time in very low lift conditions.
Features:
– 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
– Removable canopy for rapid access to the radio and drive components.
– V-shaped wing saddle with molded in nuts for the wing mounting screws.
– Tapered tail boom made of carbon fiber/glass composite.
– 3-segments wing with removable wing tips for easy storage and transportation.
– Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
– vertical stabilizer is made of glass/carbon composite
– horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.
Kit contains:
model components, plans, glider name decal, step by step instructions, and all necessary hardware.​

This electro-glider could be flown on flat terrains and on the slope in light to high wind condition is capable of performing all acrobatic maneuvers. The Solaris wing features SD7080 airfoil specially modified for this sailplane, the benefits of that are very wide range of speed and excellent thermal abilities. Its flying weight is approx. 1600 grams (~56 oz.) The Solaris wing has internally hinged ailerons and flaps. Wing could be finished with ailerons and flaps or with ailerons only if desired by the builder.
Features:
– composite Fuselage pod is made of a few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
It has removable Canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing screws.
– tapered tail boom is made of carbon fiber/glass composite.
– wing cores are precision cut from high density white polystyrene foam, and sheeted with black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds that produce perfect airfoil fidelity and a warp-free wing.
– light weight V-tail is made of foam cores pre-sheeted with thin poplar veneer for durability, stiffness and has pre-hinged control surfaces.
Kit contains:

Model components, all necessary hardware, plans and step by step instructions.

There’s a 3-8 day shipment delay for 2,5M+ models.

Avatar-EV 3.4M is an Ultra light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1340 g (~47 oz.) makes it an ultimate thermal electro-glider. Avatar-EV wing is equipped with internally hinged Ailerons and Flaps – this feature not only reduce building time but also makes the wing stronger.
The Fuselage pod and is made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
Its strong tapered tail boom is made of carbon-glass-fiber composite.
The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. Removable V-tail with pre-hinged ruddervators are made from selected balsa wood and fully laminated. The removable V-tail and 3-segment wing allows easy storage and transport flexibility.

Kit contains: model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
NOTE: Wing version with Aileron and Spoilers is also available.

There’s a 3-8 day shipment delay for 2,5M+ models.

Silent-3.4M Ultra light weight electro-glider F5J class. It’s clean low drag design provides excellent air penetration with wide range of speed and flying weight ~1330 g (~46 oz.) makes it an ultimate thermal electro-glider. This original, and very modern construction is a statement to years of experience in designing and active competition.
The Fuselage pod and vertical stabilizer are made from pre-painted, molded, composite materials (epoxy/glass-carbon-fiber).
The Fuselage pod features removable Canopy for easy access to radio and drive gear and is 2.4GHz friendly.
Its strong tapered tail boom is made of carbon-glass-fiber composite.
The wing cores are precision cut from special high-density white polystyrene foam and for superb strength wings have molded in carbon/glass composite spars.
The black poplar veneer is bonded to the foam with aircraft industry grade epoxy in high pressure mold for perfect airfoil fidelity and warp-free wing. Our original 3-segments wing design is very strong and convenient, internally hinged ailerons and flaps are minimizing the building time. The horizontal stabilizer with pre-hinged elevator and rudder are made from selected balsa wood and fully laminated. The removable horizontal stabilizer and 3-segment wing allows easy storage and transport flexibility.

Kit contains:
model, plans, step by step instructions, all necessary hardware and glider name wing sticker.
NOTE: Wing version with Aileron and Flaps is also available.

The waiting time for the delivery of 2.5M+ models is 3-8 days.