-
Klasyczny zestaw ogonowy / Classic tail set (#068C)
$ 0,00Classic tail set with prehinged rudder and elevator – balsa
-
Klasyczny zestaw ogonowy / Classic tail set (#072C)
$ 33,25Classic tail set with prehinged rudder and elevator, laminated.
-
Kołpak / 12mm spinner, Ø3,17 shaft / Tigra-E / (#A012S3)
$ 4,16Diameter/Średnica: 12mm Length/Długość: 20mm Weight/Waga: 5g Shaft diam./Średnica trzonka: 3,17mm Three piece light construction precision CNC machined from light alloy material.
Standard 5 mm mount are compatible with APC and similar propellers.APPLICATIONS:
Outrunner, Inrunner and Geared motors with 4mm shaft diameter.
– ART-400
– ART-500
or similar -
Kołpak / 31mm “LowDrag” – CNC offset spinner for FP – Ø3,00 shaft (#A031S2)
$ 57,15Diameter/Średnica: 31mm Length/Długość: 25mm Weight/Waga: 10,5g Shaft diam./Średnica trzonka: 3mm Blade mount width: 6mm Blade pin diameter: 2mm Two piece very light construction precision CNC machined from Dur-alloy material.
The narrow and offset blade mounts are suitable for:
11.5×6 and 12.5×6 CAM carbon blades (Art Hobby)
and 8×4.5, 9×5, 11×8 CAM blades (Graupner).APPLICATIONS:
Outrunner and Inrunner motors with 3.00 mm shaft diameter. -
Kołpak / 31mm “LowDrag” – CNC offset spinner for FP – Ø3,17 shaft (#A031S3)
$ 57,15Diameter/Średnica: 31mm Length/Długość: 25mm Weight/Waga: 10,5g Shaft diam./Średnica trzonka: 3,17mm Blade mount width: 6mm Blade pin diameter: 2mm Two piece very light construction precision CNC machined from Dur-alloy material.
The narrow and offset blade mounts are suitable for:
11.5×6 and 12.5×6 CAM carbon blades (Art Hobby)
and 8×4.5, 9×5, 11×8 CAM blades (Graupner).APPLICATIONS:
Outrunner and Inrunner motors with 3.17 mm (3.2 mm) shaft diameter. -
Kołpak / 31mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A031S4)
$ 57,15Diameter/Średnica: 31mm Length/Długość: 25mm Weight/Waga: 10,5g Shaft diam./Średnica trzonka: 4mm Blade mount width: 6mm Blade pin diameter: 2mm Two piece very light construction precision CNC machined from Dur-alloy material.
The narrow and offset blade mounts are suitable for:
11.5×6 and 12.5×6 CAM carbon blades (Art Hobby)
and 8×4.5, 9×5, 11×8 CAM blades (Graupner).APPLICATIONS:
Outrunner, Inrunner and Geared motors with 4mm shaft diameter. -
Kołpak / 35mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A035S4)
$ 67,54Diameter/Średnica: 35mm Weight/Waga: 20g Shaft diam./Średnica trzonka: 4mm Designed by ART HOBBY and Made in Poland.
Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
This spinner is compatible with Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 4mm shaft diameter. -
Kołpak / 35mm “LowDrag” – CNC offset spinner for FP – Ø5mm shaft (#A035S5)
$ 67,54Diameter/Średnica: 35mm Weight/Waga: 21g Shaft diam./Średnica trzonka: 5mm Designed by ART HOBBY and Made in Poland.
Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
This spinner is compatible with Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner or Geared motors with 5mm shaft diameter. -
Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø4mm shaft (#A041S4)
$ 72,63Diameter/Średnica: 40mm Length/Długość: 37mm Weight/Waga: 25g Shaft diam./Średnica trzonka: 4mm Blade mount width: 8mm Blade pin diameter: 3mm Two piece, very light construction is precision CNC machined from Dur-alloy material. We designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have internal provisions for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement many fuselage pods of the gliders and all around is enhancing gliders finale appearance. The spinner is suitable for Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 4mm shaft diameter. -
Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø5mm shaft (#A040S5)
$ 72,63Diameter/Średnica: 40mm Length/Długość: 37mm Weight/Waga: 25g Shaft diam./Średnica trzonka: 5mm Blade mount width: 8mm Blade pin diameter: 3mm Two piece, very light construction is precision CNC machined from Dur-alloy material. We designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have internal provisions for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement many fuselage pods of the gliders and all around is enhancing gliders finale appearance. The spinner is suitable for Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 5 mm shaft diameter. -
Kołpak / 40mm “LowDrag” – CNC offset spinner for FP – Ø6mm shaft (#A041S6)
$ 72,63Diameter/Średnica: 40mm Length/Długość: 37mm Weight/Waga: 25g Shaft diam./Średnica trzonka: 6mm Blade mount width: 8mm Blade pin diameter: 3mm Designed by ART HOBBY and Made in USA.
Two piece spinner, very light construction is precision CNC machined from Dur-alloy material.
Art Hobby designed this spinner to have internal-offset blade mounts. When flying with motor OFF, those features allow blades to retract flat against glider fuselage reducing air drag to minimum. This is very important because most flying time in electro-glider the motor is turned OFF and blades are folded. Spinner also have two internal posts for installing small rubber bands that help to keep blades folded tight against the fuselage pod all the time during flying when motor is turned OFF.
The spinner is nice shaped to complement our electro-gliders fuselage pods and most other fuselages on the market. All around is enhancing gliders finale appearance.
This spinner is compatible with Aeronaut and Graupner CAM blades.APPLICATIONS:
Outrunner and Inrunner Geared motors with 6mm shaft diameter. -
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 11×6
$ 9,87Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 11×6.
-
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 11×8
$ 9,87Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 11×8.
-
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 12×6,5
$ 9,87Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 12×6,5.
-
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 14×10
$ 10,91Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 14×10.
-
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 14×6
$ 10,91Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 14×6
-
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 14×8
$ 10,91Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 14×8.
-
Łopaty śmigieł CAM / CAM propeller blades (one pair) – 15×6
$ 12,47Łopaty śmigieł różne wymiary CAM (jedna para) / CAM propeller blades (one pair) – 15×6.