2.4-3.1M

The Evolution flying weight with out ballast is approx. 840 grams (29.5 oz.)
With additional ballast of 500-700g it will reveal its full speed potential. It features the MH32/30 airfoil that was specially modified for this sailplane, the benefits of that are a very wide range of speed and good thermal abilities. The Evolution wing could be built with ailerons and flaps or only with the ailerons if desired by the builder.
Features:
Composite fuselage pod is made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength. It has removable canopy for easy access to the radio gear. The V-shaped wing saddle with molded in nuts for the wing mounting bolts.
– tapered tail boom is made of carbon fiber/glass composite.
– wing cores are precision cut from white polystyrene foam, and the black poplar veneer is
bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
– light weight tail made from balsa, has pre-hinged control surfaces and is fully laminated with light weight fiber glass cloth for durability and stiffness.

Kit contains: Model components, all necessary hardware, plans and step by step instructions.

There’s a 3-8 day shipment delay for 2,5M+ models.

NEW version with ailerons and flaps. The Odyssey flying weight is approx. 890 grams (31 oz.)
It features SD7080 airfoil that was specially modified for this sailplane, the benefits of that are extended thermal duration time in very low lift conditions and wide range of speed.
Odyssey wing could be built flat with out polyhedral bends if desired by the builder.
Features:
– 2.4GHz friendly composite fuselage pod made of few layers of fiber glass with glass roving and carbon fiber reinforcements for extra strength.
– Removable canopy for rapid access to the radio components.
– V-shaped wing saddle with molded in nuts for the wing mounting screws.
– Tapered tail boom made of carbon fiber/glass composite.
– 3-segments wing with removable wing tips for easy storage and transportation.
– Wing cores precision cut from white polystyrene foam, and the black poplar veneer bonded to the foam with aircraft industry grade epoxy in high pressure molds for perfect airfoil fidelity and a warp-free wing.
– vertical stabilizer is made of glass/carbon composite
– horizontal stabilizer with pre-hinged elevator and rudder made from balsa and fully laminated with light weight fiber glass cloth for durability and stiffness.

Kit contains: model components, plans, glider name decal, step by step instructions, and all necessary hardware.​ T-tail version is also available.

There's a 3-8 day shipment delay for 2,5M+ models.